All about tips and trik for Flash drive

Block copy data from computer to flash or usbdisk

How to safeguard your computer so that data can not be copied to the flash do the following steps :



1. open REGEDIT

2. HKEY_LOCALMACHINE\SYSTEM\CurrentControlSet\Control

3. CONTROL folder, type -> Edit> New> Key
Give the new folder name -> "StorageDevicePolicies"

4. “StorageDevicePolicies”, write Edit>New>Dword (32-bit)

5. The new key named : “WriteProtect”

6. Clik 2x Key WriteProtect, Then change Value Data become 1

7. Restart


To open a protection for the data to be copied to the flash by changing the key value to 1 write protect.

UPDATE
How to open Affected Flash Disk Write Protected: .........

This problem occurs because the flash disk directly revoked without "savely removed hardware". To overcome this there are several ways, which can be managed for masing2 cases (not for each case). Nothing wrong to try:

How to 1.

- Start> Run> type 'regedit' then hit 'OK'.
- Browse to the following key:
My Computer \ HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlS et \ Control \ StorageDevicePolicies
- Double click on the string 'WriteProtect' and change the 'Value data' box to '0 '
- You may also need to do this for the strings in any folders called 'ControlSet ***' eg
My Computer \ HKEY_LOCAL_MACHINE \ SYSTEM \ ControlSet001 \ C ontrol \ StorageDevicePolicies

The second way
I am running Windows XP Service Pack 2, so this description applies only in that environment.
Centon's tech support suggested doing the following ...
Start-> Settings-> Control Panel
Administrative Tools
Computer Management
Under Storage in the left pane, click on Disk Management, wait a minute for Windows to do whatever it is doing ,......
Locate the data stick / thumb drive / whatever-you-want-to-call it, in the right top windowand click on it.
Right click
in the popup, click on "Delete Partition" - make darn sure you are doing this to the RIGHT drive !!!!!
Right click again, and choose "Create Partition" (or was it the format, I forget maybe it was both).

Cara 3.
Use of Utility Rapair flash maker. Below are links from HP and APACER a widely used and managed well for a variety of brands.
Here:
= APACER Handy Steno 2.0 Repair Tool
HP = HP Tools

Cara 4.
Refine by Linux .. Tutorial langkah2 be read here (long sorry banget soalnya). and may require an understanding of perintah2 linux.
Link: linux-tip-resurrecting-broken-usb

Cara 5.
Use OnBelay application, here: Powerful solution for Data Backup, Data Recovery & Formatting for Flash Media


---------------------------------

UPDATE AGAIN ....
Why the sudden shrinking the size of a flash drive ?

Origin is not a case of fraud flash disk from china who was actually a small capacity but conjured up as a large capacity, can be taken cara2 under tiba2 flash disk if you have the capacity corrupt. 

Please download program here :


Smart Data Recovery: http://tinyurl.com/2kcsmm

SoftPerfect File Recovery: http://tinyurl.com/jcacz

ADRC Data Recovery Software Tools: http://tinyurl.com/ppdn9

Pen Drive Data Doctor Recovery: http://tinyurl.com/2yak98

BadCopy Pro: http://tinyurl.com/ynsv8n

Key Drive Recovery Tool: http://tinyurl.com/2s6x24

Data Recovery 4 Pen Drive: http://tinyurl.com/39t2vx

-----------------------------------------
  Update January 12, 2009

USB2.0 Driver for Windows98

Windows 98 does not have drivers for removable drives such as flash disk or external HDD. If in the past some vendors still include a flash disk drivers for their products, but at the present time almost nothing to provide these drivers. Below is provided a driver that is compatible for all external drives.

Earlier check first, the version of Windows 98:
- Right click My Computer and select Properties
- On the page of System Properties page, Kilik General tab
- In Under the System heading, look for the version number (see right)
Version 4.10.1998 is the original / first edition of Windows 98 (98FE)
Version 4.10.2222 is Windows 98 Second Edition (98SE)


Download this program:
- Windows 98 FE: nusb320-Eng-98FE.exe
- Windows 98 SE: nusb33e.exe

The installation for Windows 98SE:

Download the file exe file to your desktop
Remove all drivers for USB flash drives in Device Manager
Remove all drivers USB 2.0 controllers
Remove all unknown devices from Device Manager
Run the exe file you've downloaded reply, follow the instructions, installation rebootsetelah
When the computer is in the boot again, will detect the new USB 2.0 controllers, which we may have to reboot again.
Done. 


---------------------------------------------------------------

Update 29-01-2009



eBoostr™ is an alternative solution to Vista’s ReadyBoost and SuperFetch technologies now available on Windows XP

It speeds up your PC and improves application responsiveness by using flash memory and free RAM as an extra layer of performance-boosting cache for your PC. Use up to four inexpensive flash devices to speed up your system. Add more speed to your PC without any hardware upgrade!

Download link : http://www.sharekingdom.com/download/377/eBoostr.v1.0.2%20by%20Vivec.rar

Resource: http://vivecsharing.blogspot.com/